Merge pull request #46 from mckuhei/Chinese

Create zh_cn.json

src/main/resources/assets/oc2/lang/zh_cn.json

@@ -0,0 +1,97 @@
+{
+  "itemGroup.oc2.common": "开放式电脑 II",
+
+  "block.oc2.computer": "电脑",
+  "block.oc2.computer.desc": "使用螺丝刀扳手或者兼容的扳手来添加或移除组件。",
+  "block.oc2.computer.preconfigured": "电脑（已经配置好的）",
+  "block.oc2.bus_cable": "总线线缆",
+  "block.oc2.bus_cable.desc": "与总线接口结合使用，以将外部设备连接到电脑。",
+  "block.oc2.network_connector": "网络连接口",
+  "block.oc2.network_hub": "网线集线器",
+  "block.oc2.redstone_interface": "红石接口",
+  "block.oc2.disk_drive": "磁盘驱动器",
+  "block.oc2.disk_drive.desc": "使用这个来访问软盘。",
+  "block.oc2.charger": "充电器",
+  "block.oc2.charger.desc": "通过站在上面给实体和物品充电。",
+  "block.oc2.creative_energy": "无限能量方块",
+  "block.oc2.creative_energy.desc": "提供无限的能量给连接的方块。",
+
+  "item.oc2.wrench": "螺丝刀扳手",
+  "item.oc2.wrench.desc": "当潜行时用于配置设备和拆卸设备。",
+  "item.oc2.bus_interface": "总线接口",
+  "item.oc2.bus_interface.desc": "通过总线线缆来和外部设备通讯。",
+  "item.oc2.network_cable": "网线",
+  "item.oc2.memory": "内存条",
+  "item.oc2.hard_drive": "硬盘",
+  "item.oc2.floppy": "软盘",
+  "item.oc2.flash_memory": "固件",
+  "item.oc2.redstone_interface_card": "红石卡",
+  "item.oc2.network_interface_card": "网卡",
+  "item.oc2.file_import_export_card": "文件导入/导出卡",
+  "item.oc2.file_import_export_card.desc": "提供一个API来导入/导出文件。",
+  "item.oc2.robot": "机器人",
+  "item.oc2.robot.desc": "使用螺丝刀扳手或者兼容的扳手来添加或移除组件。",
+  "item.oc2.inventory_operations_module": "物品栏操作模块",
+  "item.oc2.inventory_operations_module.desc": "允许机器人存取物品。",
+  "item.oc2.block_operations_module": "方块操作模块",
+  "item.oc2.block_operations_module.desc": "允许机器人放置/破坏方块。",
+
+  "item.oc2.transistor": "晶体管",
+  "item.oc2.circuit_board": "电路板",
+
+  "entity.oc2.robot": "机器人",
+
+  "gui.oc2.computer.error.unknown": "未知错误",
+  "gui.oc2.computer.error.missing_firmware": "丢失固件",
+  "gui.oc2.computer.error.insufficient_memory": "内存不足",
+  "gui.oc2.computer.bus_state.incomplete": "总线不完整",
+  "gui.oc2.computer.bus_state.too_complex": "总线太复杂",
+  "gui.oc2.computer.bus_state.multiple_controllers": "检测到多个总线控制器",
+  "gui.oc2.computer.error.not_enough_energy": "能量不足",
+
+  "gui.oc2.computer.capture_input.capt": "捕获输入",
+  "gui.oc2.computer.capture_input.desc": "当开启并且鼠标移动到终端内时，将捕获所有的输入，包括ESC键",
+  "gui.oc2.computer.power.capt": "电源",
+  "gui.oc2.computer.power.desc": "开启或关闭这台电脑。",
+
+  "gui.oc2.machine.open_inventory.capt": "打开物品栏",
+  "gui.oc2.machine.open_terminal.capt": "打开终端",
+    
+  "gui.oc2.device_type.memory": "内存条",
+  "gui.oc2.device_type.hard_drive": "硬盘",
+  "gui.oc2.device_type.flash_memory": "固件",
+  "gui.oc2.device_type.card": "卡",
+
+  "gui.oc2.file_chooser.title.load": "打开文件",
+  "gui.oc2.file_chooser.title.save": "保存文件",
+  "gui.oc2.file_chooser.text_field.filename": "文件名称",
+  "gui.oc2.file_chooser.confirm_button.load": "打开",
+  "gui.oc2.file_chooser.confirm_button.save": "保存",
+  "gui.oc2.file_chooser.confirm_button.overwrite": "覆盖",
+  "gui.oc2.file_chooser.cancel_button": "取消",
+
+  "manual.oc2.home": "主页",
+  "manual.oc2.blocks": "方块",
+  "manual.oc2.items": "物品",
+    
+  "message.oc2.connector.error.full": "不能放置更多线缆。",
+  "message.oc2.connector.error.too_far": "距离太远了。",
+  "message.oc2.connector.error.obstructed": "直线内有方块",
+  "message.oc2.import_file.file_too_large": "文件过大",
+  "message.oc2.invalid_facade_block": "该方块不能被用作一个面。",
+
+  "tooltip.oc2.device_needs_reboot": "需要重启",
+  "tooltip.oc2.flash_memory_missing": "启动时需要包含固件的闪存。",
+  "tooltip.oc2.memory_missing": "需要一些内存来加载闪存以执行引导.",
+  "tooltip.oc2.hard_drive_missing": "找不到硬盘。",
+  "tooltip.oc2.energy": "能量：%s",
+  "tooltip.oc2.energyConsumption": "能量使用：%s/t",
+  "tooltip.oc2.confirm": "确认",
+  "tooltip.oc2.cancel": "取消",
+
+  "subtitles.oc2.computer": "电脑:运行",
+  "subtitles.oc2.floppy": "软盘:访问",
+  "subtitles.oc2.floppy_eject": "软盘:弹出",
+  "subtitles.oc2.floppy_insert": "软盘:插入",
+  "subtitles.oc2.hdd": "硬盘:访问"
+}